RayPak Commercial Pool Heaters

Raypak commercial swimming pool heaters feature engineering and manufacturing innovations not available elsewhere including all copper and bronze waterways with copper finned tubes and bronze headers to prevent corrosion and rust that stains the pool and destroys the heater. Heater housing has a polytuf powdercoat finish that provides long-lasting, all weather protection. These pool heaters have a thermal efficiency of 82% and unmatched operating economy and low installation cost. All units are factory tested to ensure on-site performance. Click here for specification and dimensional data on these heaters.

To Select A Pool Heater:

Select the desired water temperature of the swimming pool.
Determine the mean (average) temperature of the coldest month in which the pool will be used.
Subtract the mean temperature from the desired water temperature. The difference is the temperature rise.
Calculate the surface area of the pool in square feet.
In the table below use the correct column for the required temperature rise and find the number closest to but not less than the pool surface area.

Sizing Formula
BTUH input required = Pool Area (sq ft) x Desired Temperature Rise x 15

Formula is based on 1° to 1-1/4° F temperature rise per hour and 3-1/2 MPH average wind. Where high wind conditions exist, select a pool heater one size larger than determined by formula or this table.

Faster Pool Heating
For 1-1/2° F rise per hour increase BTUH input by 50%. For 2° F rise per hour increase BTUH input 100%. Always select a heater equal to or larger than the requirement. Oversizing generally reduces fuel cost.

Table is based on a nominal 24 hour recovery period. To size a commercial pool based on a nominal 30 hour recovery period multiply listed pool size ("Pool Area in Square Feet") by a factor of 1.25. For special conditions consult factory.

Model	Type	Desired Temp. Rise In Degrees				Price
		20°	25°	30°	35°
		Pool Area In Square Feet
60-800	Indoor/Outdoor	1,700	1,360	1,135	970	$5,462.72
60-801	Indoor/Outdoor	2,090	1,670	1,390	1,190	$6,463.76
60-802	Indoor/Outdoor	2,420	1,935	1,610	1,380	$6,806.04
60-803	Indoor/Outdoor	2,750	2,200	1,830	1,570	$7,258.40
60-804	Outdoor Only	3,085	2,465	2,055	1,760	$8,204.40
60-805	Indoor Only	3,085	2,465	2,055	1,760	$7,898.24
60-806	Outdoor Only	3,610	2,885	2,405	2,060	$8,367.80
60-807	Indoor Only	3,610	2,885	2,405	2,060	$8,053.04
60-808	Outdoor Only	3,925	3,140	2,615	2,240	$9,026.56
60-809	Indoor Only	3,925	3,140	2,615	2,240	$8,710.08
60-810	Outdoor Only	4,250	3,430	2,860	2,450	$9,183.08
60-811	Indoor Only	4,250	3,430	2,860	2,450	$10,684.64
60-812	Outdoor Only	4,710	3,765	3,140	2,690	$11,635.80
60-813	Indoor Only	4,710	3,765	3,140	2,690	$11,140.44
60-814	Outdoor Only	5,230	4,185	3,485	2,990	$12,268.76
60-815	Indoor Only	5,230	4,185	3,485	2,990	$11,773.40
60-816	Outdoor Only	5,860	4,685	3,905	3,345	$14,172.80
60-817	Indoor Only	5,860	4,685	3,905	3,345	$13,692.92
60-818	Indoor/Outdoor	7,000	5,600	4,665	4,000	$16,632.40
60-819	Indoor/Outdoor	8,330	6,660	5,550	4,760	$17,432.20
60-820	Indoor/Outdoor	10,000	8,000	6,665	5,710	$19,721.52
60-821	Indoor/Outdoor	11,665	9,330	7,775	6,665	$21,188.68
60-822	Indoor/Outdoor	13,330	10,665	8,885	7,615	$23,653.44

Drafthood for Pool Indoor Heaters (required for the following models only):

Item #61-270	Drafthood for Model #60-800 Shipping Weight: 40 lbs.	$231.00
Item #61-272	Drafthood for Model #60-801 Shipping Weight: 45 lbs.	$262.50
Item #61-274	Drafthood for Model #60-802 Shipping Weight: 50 lbs.	$275.10
Item #61-276	Drafthood for Model #60-803 Shipping Weight: 55 lbs.	$300.30
Item #61-278	Drafthood for Model #60-805 Shipping Weight: 30 lbs.	$365.40
Item #61-280	Drafthood for Model #60-807 Shipping Weight: 45 lbs.	$375.90
Item #61-282	Drafthood for Model #60-809 Shipping Weight: 45 lbs.	$375.90
Item #61-284	Drafthood for Model #60-811 Shipping Weight: 80 lbs.	$556.50
Item #61-286	Drafthood for Model #60-813 Shipping Weight: 80 lbs.	$556.50
Item #61-288	Drafthood for Model #60-815 Shipping Weight: 80 lbs.	$556.50
Item #61-290	Drafthood for Model #60-817 Shipping Weight: 95 lbs.	$569.10

Tops for Outdoor Pool Heaters (required for the following models only):

Item #61-150	Top for Model #60-800 Shipping Weight: 40 lbs.	$495.60
Item #61-152	Top for Model #60-801 Shipping Weight: 45 lbs.	$512.40
Item #61-154	Top for Model #60-802 Shipping Weight: 50 lbs.	$550.20
Item #61-156	Top for Model #60-803 Shipping Weight: 55 lbs.	$606.90

Optional Pool Heater Equipment:

Always review state and local heater codes for your area before ordering.

Item #61-230	CSD-1 Controls Includes high limit and loose flow switch. Does not include manual ignition lock. Specify model - this item is priced on request.	P.O.R
Item #61-205	F-9 Low Water Cutoff - indoor In 2" tee on outlet. For models 60-800 - 60-809.	$573.30
Item #61-210	F-9 Low Water Cutoff - outdoor In 2" tee on outlet. For models 60-800 - 60-808.	$573.30
Item #61-215	F-9 Low Water Cutoff - indoor In return header. For models 60-811 - 60-817.	$573.30