![]() |
Secure Online Shopping
|
Hydrel Pool Lights
|
![]() |
| Hydrel Underwater Light Model
4425 These heavy-duty cast bronze underwater fixtures have stainless steel forming niches designed for "wet niche" installation in swimming pools. They can accommodate 120 volt PAR 56, 500 watt quartz, 300 watt incandescent and 12 volt PAR 56, 300 watt lamps (not included). A cast bronze safety "Electro-Grid" is located between the face of the lamp and the lens, forming a protective barrier from any electrical field that might occur as a result of fixture malfunction. Comes with a 35' cord. Light niche sold separately. Lamp is included. |
![]() |
| Hydrel Underwater LED Light Model
4426 This new LED swimming pool light use an RGB (red, blue, green) color array to create DMX controlled color changing lighting affects. It is designed to be recessed into a stainless steel niche as a "wet niche" type fixture. Comes with 35' cord. Light niche sold separately. LED lamps are included. |
![]() |
| Hydrel Underwater Light Model
4427 This heavy-duty cast bronze light fixture has a stainless steel forming niche designed for "wet niche" installation and uses a 120 volt PAR 64, 1000 watt quartz lamp (not included). A cast bronze safety "Electro-Grid" located between the face of the lamp and the lens provides a protective barrier from any electrical field that might occur as a result of fixture malfunction. Comes with 35' cord. Light niche sold separately. Lamp is included. |
![]() |
| Hydrel Underwater Light Model
4428 This heavy cast bronze underwater Metal Halide fixture is the first of its kind designed for use in swimming pools. It is designed for recessed, "wet niche" installation in a stainless steel niche and uses an E-17, 175 watt metal halide lamp (included). Lamp life of up to 10,000 hours is much longer than that of other bulbs used for underwater lighting. The integral ballast is completely encapsulated in a custom epoxy. An Electro-Grid located between the lamp and lens provides a protective barrier to any electrical field that may form in a fixture malfunction. Comes with 35' cord. Light niche sold separately. Lamp is included. |
![]() |
| Hydrel 4800 Series Underwater
Light These lights are smaller than conventional fixture, about 1/5 the cubic volume, and use either a 120 volt, 100 watt or 150 watt quartz halogen or 12 volt, 75 watt quartz halogen lamp (included). Comes with 35' cord. Square bezel is available with a special charge. Light niche sold separately. Lamp is included. |
| Additional Cord Lengths: Available on all lights. |
| Low Voltage Transformers: Low voltage lighting fixtures require that line voltage be stepped down. This is normally accomplished through a voltage transformer or series of transformers located in the pool equipment area. Special consideration must be given to the length of cords used with on low voltage underwater light fixtures. |
| Deck Mounted Junction Box: Specifically designed for above deck or remote wall mounting, this junction box meets all NEC requirements and constructed of cast bronze with a neoprene gasket and stainless steel fasteners. The unit has one hub on each end and two hubs on one side. The entire bottom of the unit and the E-M-F side of the box are suitable for NPT drilling (special drilling is available upon approval). |
|
Cleaning/Maintenance
Facility Equip Project Design |
|
Home
|
| This site website
is optimized for viewing at 800 x 600 © Recreonics, Inc. All Rights Reserved. |