3 Meter Left Mount S R Smith Dive Tower
3 Meter Lef Mount S R Smith dive tower features the highest level of design fabrication strength to meet ANSI standards. When properly installed and equipped, it will meet or exceed the standards set by FINA, NCAA and U S Diving governing bodies. Diving board is sold separately. Shipping Weight: 1,135 lbs.
3 Meter Left Mount S R Smith Dive Tower Specifications:
Front Post Assembly – is 10" schedule 20 carbon steel pipe 15 degrees, welded to a 5/8" top plate and a ¾" bottom plate.
Dive Tower Ladder Assembly – consists of two 1.90" O.D. x .145" wall 304 stainless steel welded mirror finish ladder posts with 1 5/8" O.D. x .065" wall stainless steel tube handrails. Nine 6" wide non-slip, stainless steel treads.
Tray Assembly – 3/16" carbon steel plate formed and reinforced using 3/8" plates. The tray will accept any mounting configuration.
Jig Assembly – smaller jig designed for easier installation. Six 1" bolts with reinforcing rods hold the ¾" flange plate into the concrete. Jigs are also provided for the ladder assembly and the heel mount post (side mount towers only).
Dive Tower Quick Adjustable Fulcrum – features heavy duty design with brass gears and tracks. The rear ratchet assembly is machined from high quality stainless steel pipe. Ratchet handle allows for ease in adjusting forward or backward movement of the fulcrum.
Tie-Down Assembly – is mounted in neoprene blocks that are secured to the tray by 3/16" diameter straps bolted in place. The board is bolted to a 5/16" x 2 ½" x 2 ½" steel angle welded to a 1" diameter bar. The board is held up with a T-bar that is placed in a socket on the tray.
Dive Tower Handrails – are 36" above the board and extend at least to the edge of the pool and made of 1.90" O.D. x .065" wall 304 stainless steel welded mirror finish tubing.