10.0 – 20.0 HP Emotron Automatic Pump Shut-Off System
Emotron PSP20 Automatic Pump Shut-Off System’s patented Shaft Power Monitoring technology uses the existing pump motor as a sensor to reliably detect a swimmer blocking the suction drain and quickly shut off the pool pump. It accurately monitors motor power for either single phase or three-phase pumps. The PSP20 Automatic Pump Shut-Off System is a fully assembled control panel, designed to be installed between an existing pump control panel and the pump motor. Installation is typically completed in less than one hour with just one trade skill, an electrician. Programming the PSP20 is also very simple and takes just a couple of minutes. Setting the motor’s HP, full load amps and the number of phases are the only parameters. Once the pump is operating in normal conditions, calibration takes just 3 seconds! Providing the pool’s filtration equipment and pump are correctly maintained, the PSP20 will not produce a false alarm. It does not require winterizing or plumbing work, and impervious to the effects of filter backwashing and pool vacuuming. There is no need to disable system protection during these activities. There are over 350,000 Emotron PSP20 Automatic Pump Shut-Off Systems pump monitors installations worldwide.
10.0 – 20.0 HP Emotron Automatic Pump Shut-Off System Specifications
– CPSC recognized VGB secondary anti-entrapment method
– Certified to comply with ASME A112.19.17-2002
– UL listed to UL 508A
– Horsepower: 10.0 to 20.0
– Voltage: 208/230
– Phase: 1 or 3
– AMP Range: 51 to 65
– Shipping Weight: 12 lbs.