Water Level Controllers
 |
 |
|
Model K-1100 with Solenoid Value |
Model K-2000 with Solenoid Value |
Levolor Electronic Water Levelers
Levolor Electronic Water Levelers are water fill sensing devices
that can be used in all aquatic environments, new or existing.
Levelor Model K-1100 detects low water conditions and
automatically replaces the water to a pre-set level and can be
used in any situation where a consistent water level is
required. Levelor Model K-2000 detects low and high water
conditions and automatically adjusts to maintain the desired
water level. Both systems include the wall mounted mount
controller that is factory wired for 220 volt but field
adjustable for 110 volt service and sensor assembly with
sensor wire. Available with or without the 1" plastic 24-VAC
solenoid valve that will regulate flow up to 30 gpm. |
| Item#32-561 |
Levolor K-1100 without Solenoid
Includes 50' sensor wire. |
$376.42 |
 |
| Item#32-562 |
Levolor K-1100 with 1" Solenoid
Includes 50' sensor wire. |
$424.62 |
|
| Item#32-569 |
Levolor K-1100 without Solenoid
Includes 100' sensor wire. |
$389.44 |
|
| Item#32-568 |
Levolor K-1100 with 1" Solenoid
Includes 100' sensor wire. |
$435.03 |
|
| Item#32-571 |
Levolor K-2000 without Solenoid
Includes 150' sensor wire. |
$623.88 |
|
| Item#32-565 |
Levolor K-2000 with 1" Solenoid
Includes 50' sensor wire. |
$623.88 |
|
| Item#32-572 |
Levolor K-2000 with 1" Solenoid
Includes 100' sensor wire. |
$640.82 |
|
 |
Electronic Level Control
This non-modulating float accurately controls liquid levels in
tanks and is fully open when the water level reaches a preset
low point and closes drip-tight when the water level is at the
preset high point. This is a hydraulically operated diaphragm
valve with the pilot control and float mechanism mounted on the
main valve cover. The float positions the pilot control to close
when the float makes contact with the upper stop. Float valve is
made of ductile iron with bronze trim and comes with CF1-C1
float control with two 12" sections of PVC rod and one PVC
float. Available also in stainless steel and brass and with
epoxy coating. |
| Item#32-510 |
1" CLA-VAL Float Valve
Weight: 8 lbs. |
$1,079.92 |
|
| Item#32-512 |
1 1/2" CLA-VAL Float Valve
Weight: 15 lbs. |
$1,499.65 |
|
| Item#32-514 |
2" CLA-VAL Float Valve
Weight: 35 lbs. |
$1,530.28 |
|
| Item#32-516 |
3" CLA-VAL Float Valve
Weight: 70 lbs. |
$1,982.16 |
|
| Item#32-520 |
PVC Float Rod - per foot |
$27.58 |
|
| Item#32-522 |
CK2 Cock (Isolation Valve) |
$238.96 |
|
| Item#32-523 |
CV Closing Valve |
$257.35 |
|
| Item#32-524 |
CV Opening Valve |
$257.35 |
|
 |
ELC-800r Electronic Water Level Controller
The newly redesigned electronic water level controller adds
enhanced features and functionality to existing reliable
proximity sensing technology. These water level controllers
feature an easy to program menu and have the ability to sense
dangerously low water conditions and deactivate circulation
pumps, protecting them from damage. Several single sensing
ability applications are available. |
| Item#32-622 |
Standard Well Water Level Controller
This water level controller is designed for mounting at static
water levels, usually in a pump pit in the equipment room. |
$1,788.93 |
|
| Item#32-623 |
Wet Well Water Level Controller
The wet well water level controller allows pool and spa sensing
in a 2" static well, usually in the equipment room. |
$1,788.93 |
|
| Item#32-624 |
Sight Glass Water Level Controller
Sight glass water level controller is typically used in pools
and spas with a balance tank. |
$1,788.93 |
|
| Item#32-625 |
Surge Tank Water Level Controller
Surge tank water level controller allows for mounting in a surge
tank and is used for overflow gutter applications. |
$1,788.93 |
|
|
